Entry in this screen is generally limited to the details lines, there are however two areas at the bottom with additional information, neither of which can be amended by the users.

Item Entry

Field Definitions

The fields on the form should contain the information below:

Field	Notes	Auto Fill from Product Code	Required
Product	Product Code field If entered then the product will be looked up and if it does not exist you will be presented with the options to CREATE (NOT using system products) FIND (using system products for the customer)		No
Product Type	The Type of Product	YES	YES
COO	Country Of Origin of the product	YES	YES
Brand	Producer / Manufacture or Brand of the product	YES	NO
Product Description	The basic description of the product Note Do not include information which is in another field below	YES	YES
Year	Year or Vintage of the item, this needs to be either Info Options are YYYY or NA or NV	YES	YES
SPC	Singles per Case Info Requires a value of at least 1	YES	YES
SS (L)	Single Size - It is the size or volume of the item Info Requires a value, if not applicable then use 1	YES	YES
CPP	Cases per pallet Info Mandatory if you are charging or ordering using pallets.		NO
E Ps/E Cs/E Ss	Expected Pallets / Cases / Singles Quantity fields of what to expect for this delivery into the warehouse.	NO	YES, at least one of them
D Paid	Does this line contain Duty Paid stocks If the goods are arriving Duty Paid, if so then tick this box The default is NO	NO	NO
Loose	Are the goods expected to be loose, warehouses charge additional handling charge for loose goods (default is No)	NO	NO
CR	Condition Report required. Info This may default using the Product Group of the product or the Delivery Type set in the header of the pre-advice This will enter a condition report request automatically when the goods are received, this report will then have to be actioned	NO	NO
	If a basic picture has been taken through FLEX at goods inwards process then it will be linked and shown here. This is not a condition report.	NO	NO

Form Options

The section below describes the button options which you can see around the pre-advice page:

LOAD SO

If your inbound goods are a Transfer, this will open the linked Sales Order for the inbound transfer.

RESET LAYOUT

If you adjust the columns on the details pages, that is usually saved for future use. However, if you want to reset this to the default click the RESET LAYOUT function.

Put Away Note

Produces the Put Away Note, usually printed after the goods have been offloaded, checked and updated on the WMS.

Expand
title Click Here To Know More...
In the Order Item Details tab, while creating or updating a pre-advice entry, you can change the Year(Vintage), which is different from the product record so that these are then consistent with the other goods in notes. If product P has set the ‘Year' field value to NV, you can change this field value in Pre-Advice, and when you click ‘Put Away Note’ and take printout this updated value will be shown in the 'Year’ column. The pre-advice will give warning signs to the user of a difference between pre-advice & product attributes in Bond Details rather than earlier in the process. Warnings will be visible against each of the fields in the Order Item Details tab grid.

Check Sheet

This button produces the check sheet for the goods inwards and is used at the point when the goods are being offloaded from the vehicle.

Expand
title Click Here To Know More...
You can receive a check sheet by going to your Pre-Advice and clicking the Checksheet button. You can take a printout of it if you need one. If the booking is made for this pre-advice, a booking reference number will be included in the checksheet. Along with general details, If the product needs Condition Report, it will be marked with the text ‘CR’.

Send Request Email

This is an optional module and will send an email to your customer requesting product codes and values for the products shown in the tab above. It is generally used when the goods arrive at the warehouse and the customer is not using a pre-advice, so the warehouse only knows the name and description and basic details.

Completed on Transfer Order

Should your customer send a pre-advice which is being transferred to you from another internal customer you will be able to use this feature to associate the two entries together and it will also cancel the entry as you only need the one which the system has generated, this button will only appear in certain conditions.

Other Areas

..