Configuration - Printers

Printers

Use the Printer Configuration screen to which Site the printers belong to and whether they will be used for labels.

Labels Only, ticking this field will include this printer in the synchronised list the next the Flex application is logged into on a device.

When entering the Network path, this must be correct otherwise you will be unable to print

Your IT department should be able to tell you the correct Network Path.

Other Information

Flex Lite

This tab will only be used if you are using Flex Lite. (this is not the Flex application that is described on the Flex for WMS page

The Printer Name and IP Address of the Printer and the Printer Port (if needed), should be filled in correctly for the Flex Lite device to see the Printer.

Rotation Label Printing Setup and Administration.

Check the Labels Only? field against any printer you want to use with the Flex Device on the Printers Tab

Log in to Flex.

It will synchronise the Printers against the User's site.

Open the User's profile settings in the Flex application.

Specify the default printer to use for Goods In Rotation labels.

Once set the printer will show as the default when moving through the Goods In screens.

It is possible to change from the default printer to one of the others you selected on the Printers tab while using the application.

Flex User Setup and Administration:

Please see the User tab at the top of this page for more information regarding the Flex Users