Exchange Email Connector Setup

In order to send emails as any user of your organisation then you will need to setup this connector on your exchange server.

 

The IP addresses shown below are examples ONLY.
These need to be filled with the address for the server which will be sending the email.
If you do not already know this address range then you will need to speak to the person implementing Vision for you as they are only allocated once the server is operational.

Step 1
Step 2

You will also require a Rule to be configured to set the SCL down to 0 when received form the Vision Server – other thing you could do is add the IP to your SPF record

 

Copyright Ontech Solutions 2017-2024. All rights reserved, no part may be replicated or distributed without the express permission of the owner.